THE OCEANIC OC1 DIVE COMPUTER INTRODUCTION: VIDEO & TRANSCRIPT:

The Oceanic OC1 is an advanced, all-in-one dive computer featuring Oceanic's exclusive dual algorithm, wireless air integration, digital compass, remote buddy pressure check and so much more, all in a strong, lightweight, titanium housing.

eDiving is a scuba diving simulator featuring the advanced Oceanic OC1 dive computer. To control the OC1 while eDiving, press 1 for the Mode button, press 2 for the Advance button and press 3 for the Select button. This video takes place in the Veteran's Park eDive site. Press Z to maximize the OC1. Since we got it wet, the OC1 is now in dive mode, though you can navigate watch mode in the same manner.

You can see the Oceanic OC1 dive computer has four buttons. They include the Mode button, Advance button, Select button and Light button. The backlight is not supported while eDiving. Each button has two states. For example, pressing Mode for two seconds will change the dive-out mode. Pressing Mode for less than two seconds will bring up the access menus. Pressing Advance will scroll down through the access menus.

Let's choose the F02 access menu as an example. Oops, I went too far. Press Mode to scroll up. Press Select to enter the menu. Press Select again to choose the F02. Press Advance to increase the set point, and Mode to step back. Press Select to set it. To enter Compass mode, press and hold Select. Press and hold Select again to return.

You choose what dive mode you are in from the main Access menu. Press Mode, scroll to Dive Mode and press Select. To return to the previous menu without selecting anything, press and hold Select. To exit to the main menu, press and hold Mode.